Step 11 Remove the hard drive. We have almost finished disassembling, but the last step is to remove the hard drive. To do this we have to turn the laptop and remove 2 screws. When you open the lid, we will find a space reserved only for the hard disk and inside, we must remove another 2 screws. Once shots, we move it to our left and remove it.Page 70 As and keys are pressed, press the Power button to turn on the target machine. Wait for 3~5 seconds to make sure the system fan is in full speed before releasing and keys. Figure 2:43. Press the Power Button Wait for 3~5 minutes for the system to complete the crisis operation.
In this video I'm covering how to Replace Hard drive on Acer Aspire All In One Model Number Z3-711 step by step. Changing HDD On Acer aspire All In One Syst
Open the lid othe the netbook. Use the Jimmy from the upper left corner of the keyboard. Put it between the keyboard and th casing and move it to the right. It might help to use a metal spudger to push in the pins holding the keyboard in place. Then move down along the sides where there is one pin on each side.
You can learn step by step how to repair acer laptop motherboard.#acer #laptop #laptop_repair_zoneacer laptop wont turn on after update.acer laptop not work
The Acer Aspire Switch 10 SW5-011-18R3 was first released on June 1st 2014. It has a 10.1 inch LED-lit screen with a 1366x768 screen resolution. It has a quad-core 1.33GHz processor with 2 GB of RAM. As a 2-in-1 laptop and tablet, it has a detachable touch capacitive screen. This model comes with 32 GB of internal storage while the SW5-012
Step 4 Keyboard. Open the lid othe the netbook. Use the Jimmy from the upper left corner of the keyboard. Put it between the keyboard and th casing and move it to the right. It might help to use a metal spudger to push in the pins holding the keyboard in place. Then move down along the sides where there is one pin on each side.